Planter
Step 1
Between pours, apply Xypex Concentrate slurry to all joint surfaces at the rate of 2.0 lb./sq. yd. (1.0 kg/m2).
Step 2
Apply one slurry coat of Xypex Concentrate at the rate of 1.5 lb./sq. yd. (0.8 kg/m2) to all interior wall and floor surfaces.
Step 3
After slurry coat has set but while it is still “green”, apply a cove strip of Xypex Modified mortar over interior slab/wall construction joint.
Note 1: Schematic diagram shows Xypex application details only and does not depict standard requirements for waterstops or expansion joint sealants.
Note 2: Schematic drawing shows Xypex Coating application. Specifier may consider the alternative use of Xypex Dry Shake (DS-Series) or Xypex Additive (Admix C-Series), where applicable.
Refer to Standard Specifications for more information.